Gaskets – Flamec https://flamec.in We are here to build a better sustainable tomorrow with you, together Sun, 05 Jan 2025 18:36:17 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://flamec.in/wp-content/uploads/2024/12/favicon-50x50.png Gaskets – Flamec https://flamec.in 32 32 Cork Gaskets https://flamec.in/product/cork-gaskets/ Tue, 10 Dec 2024 10:25:57 +0000 https://flamec.in/?post_type=product&p=4118 Cork is available as natural, resin bonded & rubber bonded. Rubber bonded cork is used for gaskets. Cork gaskets vary depending on the size of the granules used to manufacture the material & the base rubber compounds with which the material is bonded (commonly neoprene or nitrile).

 ]]> Cork is available as natural, resin bonded & rubber bonded. Rubber bonded cork is used for gaskets. Cork gaskets vary depending on the size of the granules used to manufacture the material & the base rubber compounds with which the material is bonded (commonly neoprene or nitrile).

 ]]> 4118 Aluminium Gasket https://flamec.in/product/aluminium-gasket/ Tue, 10 Dec 2024 10:24:58 +0000 https://flamec.in/?post_type=product&p=4117 4117 Copper Gasket https://flamec.in/product/copper-gasket/ Tue, 10 Dec 2024 10:23:47 +0000 https://flamec.in/?post_type=product&p=4116
  • Copper is the standard by which all other conductors are measured, therefore a copper gasket provides superior thermal conductivity, acting to stabilize head & block temperatures which makes tuning easier.
    • 25% coefficient of elasticity. One of the properties of copper is that it stretches Before a catastrophic failure, thereby providing an extra measure of safety in case of severe detonation.
    • Copper (in the form we use) has a tensile strength of approximately 2206 bar,compare this to the 82 to 100 bar tensile of most facing materials used on conventional performance head gaskets.
    ]]>
  • Copper is the standard by which all other conductors are measured, therefore a copper gasket provides superior thermal conductivity, acting to stabilize head & block temperatures which makes tuning easier.
    • 25% coefficient of elasticity. One of the properties of copper is that it stretches Before a catastrophic failure, thereby providing an extra measure of safety in case of severe detonation.
    • Copper (in the form we use) has a tensile strength of approximately 2206 bar,compare this to the 82 to 100 bar tensile of most facing materials used on conventional performance head gaskets.
    ]]>     4116     Graphite Gaskets https://flamec.in/product/graphite-gaskets/ Tue, 10 Dec 2024 10:22:05 +0000 https://flamec.in/?post_type=product&p=4115 4115 PTFE Gaskets https://flamec.in/product/ptfe-gaskets/ Tue, 10 Dec 2024 10:21:14 +0000 https://flamec.in/?post_type=product&p=4114 PTFE provides excellent thermal insulation & is the most chemically resistant plastic known. It is unaffected by most corrosive liquids, vapours and gases. PTFE will Insulateto 500 volts permit n & does not melt. Because of these properties, PTFE gaskets, washers & seals are used in petrochemical, electrical & food industries

     ]]>     PTFE provides excellent thermal insulation & is the most chemically resistant plastic known. It is unaffected by most corrosive liquids, vapours and gases. PTFE will Insulateto 500 volts permit n & does not melt. Because of these properties, PTFE gaskets, washers & seals are used in petrochemical, electrical & food industries

     ]]>     4114     Rubber Gaskets https://flamec.in/product/rubber-gaskets/ Tue, 10 Dec 2024 10:19:49 +0000 https://flamec.in/?post_type=product&p=4113 Rubber Gaskets]]> Rubber Gaskets]]> 4113 Non Asbestos Gaskets https://flamec.in/product/non-asbestos-gaskets/ Tue, 10 Dec 2024 10:18:12 +0000 https://flamec.in/?post_type=product&p=4112
  • General Purpose Sheet Jointing & Gasket

    • General purpose gasket sheet, economical, composed of quality High quality inorganic fibres & NBR Binder for mild service in piping, OEM applications in hydrocarbons & refrigerants. Max Peak Temp: 280°C Pressure max: 40bar Max Cont. Temp: 150°C

    • HIGHER GRADE SHEET JOINTING & GASKETS

    Wide application gasket sheet produced with high grade Aramid Fiber & inorganic fibers blended with NBR binder. Best useful in process industries like pulp & paper, power, & petrochemicals. An excellent gasket for steam, mild caustics & acids in class 150 and 300 rating services. Exhibits good compressibility & recovery, seal-ability, flexibility & cutting characteristics. Max Peak Temp: 380°C Pressure max: 100bar Max Cont. Temp: 280°C

    • SUPERIOR QUALITY SHEET JOINTING & GASKETS

    High strength gasket sheet for severe applications throughout various industrial purposes like steam, natural gas, refrigerants, pulp & paper, food, beverage, pharmaceuticals,chemical, refinery & general industry. Composed of high strength Aramid & inorganic fibers-bonded with high quality NBR rubber. Max Peak Temp: 430°C Pressure max: 100bar Max Cont. Temp: 280°C

    • TEMPERATURE RESISTANT SHEET JOINTING & GASKETS

    High heated furnaces & molten bitumen are always a problematic area for gaskets designed to achieve long life sealing in heated joints & hot fluids. We blend Carbon Fiber with high grade NBR binder to attain special properties of industry needs. It is also produced with SS wire reinforced for higher tensile and strength. Max Peak  Temp : 450°C Pressure max: 150barMax Cont. Temp: 300°C

    ]]>
  • General Purpose Sheet Jointing & Gasket

    • General purpose gasket sheet, economical, composed of quality High quality inorganic fibres & NBR Binder for mild service in piping, OEM applications in hydrocarbons & refrigerants. Max Peak Temp: 280°C Pressure max: 40bar Max Cont. Temp: 150°C

    • HIGHER GRADE SHEET JOINTING & GASKETS

    Wide application gasket sheet produced with high grade Aramid Fiber & inorganic fibers blended with NBR binder. Best useful in process industries like pulp & paper, power, & petrochemicals. An excellent gasket for steam, mild caustics & acids in class 150 and 300 rating services. Exhibits good compressibility & recovery, seal-ability, flexibility & cutting characteristics. Max Peak Temp: 380°C Pressure max: 100bar Max Cont. Temp: 280°C

    • SUPERIOR QUALITY SHEET JOINTING & GASKETS

    High strength gasket sheet for severe applications throughout various industrial purposes like steam, natural gas, refrigerants, pulp & paper, food, beverage, pharmaceuticals,chemical, refinery & general industry. Composed of high strength Aramid & inorganic fibers-bonded with high quality NBR rubber. Max Peak Temp: 430°C Pressure max: 100bar Max Cont. Temp: 280°C

    • TEMPERATURE RESISTANT SHEET JOINTING & GASKETS

    High heated furnaces & molten bitumen are always a problematic area for gaskets designed to achieve long life sealing in heated joints & hot fluids. We blend Carbon Fiber with high grade NBR binder to attain special properties of industry needs. It is also produced with SS wire reinforced for higher tensile and strength. Max Peak  Temp : 450°C Pressure max: 150barMax Cont. Temp: 300°C

    ]]>     4112     Ring Joint Gaskets https://flamec.in/product/ring-joint-gaskets/ Tue, 10 Dec 2024 10:11:21 +0000 https://flamec.in/?post_type=product&p=4111 The RTJ standard size gaskets are manufactured in accordance to API 6A and ASME B 16.20specifications. RING JOINT gaskets come in four basic profiles, R-Oval, R Octagonal, RX & BX. Rubber or PTFE coated RING JOINT also available.

    • TYPE R

    Style R ring joint gaskets are manufactured in accordance with both API 6A and ASME B16.20 size/ratings. Available in both oval & octagonal con­gurations, both types are interchangeable on modern octagonal type grooved flanges. Style R Ring Joint gaskets can be manufactured in accordance with relevant standards to suit the following flange designations:

    API 6A, ASME/ANSI B16.5, MSS SP44 (ASME B 16.47 Series A) & BS 1560.
    • TYPE RX

    Style RX ring joint gaskets are a pressure-energised adaptation of the standard Style R gasket. The RX is designed to ­the same groove design as a standard Style R, making the joints interchangeable. The modi­ed design uses a pressure-energised effect that improves the efficiency of the v seal as the internal pressure of the system increases.

    • Type BX

    Style BX ring joint pressure energised gaskets are manufactured in  accordance with API 6A & are designed for use on pressurised systems up to 20,000 PSI. When correctly fitted, the style BX gasket allows virtual surface-to-surface contact of the flange faces, which means that the gasket is fully  trapped on both the inner & outer diameters.

     ]]>     The RTJ standard size gaskets are manufactured in accordance to API 6A and ASME B 16.20specifications. RING JOINT gaskets come in four basic profiles, R-Oval, R Octagonal, RX & BX. Rubber or PTFE coated RING JOINT also available.

    • TYPE R

    Style R ring joint gaskets are manufactured in accordance with both API 6A and ASME B16.20 size/ratings. Available in both oval & octagonal con­gurations, both types are interchangeable on modern octagonal type grooved flanges. Style R Ring Joint gaskets can be manufactured in accordance with relevant standards to suit the following flange designations:

    API 6A, ASME/ANSI B16.5, MSS SP44 (ASME B 16.47 Series A) & BS 1560.
    • TYPE RX

    Style RX ring joint gaskets are a pressure-energised adaptation of the standard Style R gasket. The RX is designed to ­the same groove design as a standard Style R, making the joints interchangeable. The modi­ed design uses a pressure-energised effect that improves the efficiency of the v seal as the internal pressure of the system increases.

    • Type BX

    Style BX ring joint pressure energised gaskets are manufactured in  accordance with API 6A & are designed for use on pressurised systems up to 20,000 PSI. When correctly fitted, the style BX gasket allows virtual surface-to-surface contact of the flange faces, which means that the gasket is fully  trapped on both the inner & outer diameters.

     ]]>     4111     Metal Jacketed (Heat Exchanger) Gaskets https://flamec.in/product/metal-jacketed-heat-exchanger-gaskets/ Tue, 10 Dec 2024 09:35:01 +0000 https://flamec.in/?post_type=product&p=4110 Grooved metal consists of a metal core serrated on each side & covered with soft filler that is bonded to each face. This is ideal for both standard pipe & heat exchanger applications. Mainly there are three major types of Grooved gaskets available & any other configurations & custom shapes can also be produced. This is a basic Kamprofile with no outer ring. It is used in a confined space or recessed flange such as tongue & groove or male/female. This is designed with an integral outer guide ring for aligning accuracy. This is primarily used in standard ANSI B 16.5 flanges, raised face or flat ace.

    • Filler Materials
    • Non-Asbestos
    • Flexible Graphite
    • Ceramic
    • PTFE
    • Corrugated Metal
    • Types Of Jacketed Gaskets
    • Single Jacket
    • Single Jacket With Overlap
    • Double Jacket
    • Corrugated Double Jacketed
     ]]>     Grooved metal consists of a metal core serrated on each side & covered with soft filler that is bonded to each face. This is ideal for both standard pipe & heat exchanger applications. Mainly there are three major types of Grooved gaskets available & any other configurations & custom shapes can also be produced. This is a basic Kamprofile with no outer ring. It is used in a confined space or recessed flange such as tongue & groove or male/female. This is designed with an integral outer guide ring for aligning accuracy. This is primarily used in standard ANSI B 16.5 flanges, raised face or flat ace.

    • Filler Materials
    • Non-Asbestos
    • Flexible Graphite
    • Ceramic
    • PTFE
    • Corrugated Metal
    • Types Of Jacketed Gaskets
    • Single Jacket
    • Single Jacket With Overlap
    • Double Jacket
    • Corrugated Double Jacketed
     ]]>     4110     Grooved Metal (Kamprofile) Gasket https://flamec.in/product/grooved-metal-kamprofile-gasket/ Tue, 10 Dec 2024 09:32:44 +0000 https://flamec.in/?post_type=product&p=4109 Mainly there are three major types of Grooved gaskets available & any  other configurations & custom shapes can also be produced. This is a basic Kamprofile with no outer ring. It is used in a confined space or recessed flange such as tongue & groove or male/female. This is designed with an integral outer guide ring for aligning accuracy. This is primarily used in standard ANSI B 16.5 flanges, raised face or flat ace.

    ]]>     Mainly there are three major types of Grooved gaskets available & any  other configurations & custom shapes can also be produced. This is a basic Kamprofile with no outer ring. It is used in a confined space or recessed flange such as tongue & groove or male/female. This is designed with an integral outer guide ring for aligning accuracy. This is primarily used in standard ANSI B 16.5 flanges, raised face or flat ace.

    ]]>     4109